Difference between revisions of "MATLAB: Denavit Hartenberg parameters"
From Robotics
| Line 6: | Line 6: | ||
:<math>L = Link(\text{'theta'}, v_t, \text{'a'}, v_a, \text{'alpha'}, v_{al})</math> | :<math>L = Link(\text{'theta'}, v_t, \text{'a'}, v_a, \text{'alpha'}, v_{al})</math> | ||
So if a manipulator consisting of one prismatic joint and two revolute joints is to be created, the three links could be configured as follows: | So if a manipulator consisting of one prismatic joint and two revolute joints is to be created, the three links could be configured as follows: | ||
| − | [[file:links.png|left|612px]] | + | [[file:mat-links.png|left|612px]] |
Revision as of 11:40, 14 January 2016
| ← Previous: Quaternions |  Web interface | MATLAB overview | Back to article: Denavit-Hartenberg parameters |
Next: A-Matrices → |
Individual Links can be configured using the class Link of the Robotics Toolbox. For a revolute joint, the parameter 
is dynamic. So only the three other parameters have to be configured in the following way:
For a prismatic joint, respectively, the parameter 
is dynamic and is not to be set:
So if a manipulator consisting of one prismatic joint and two revolute joints is to be created, the three links could be configured as follows:
