MATLAB: Denavit Hartenberg parameters
From Robotics
← Previous: Quaternions | ![]() |
Next: A-Matrices → |
Individual Links can be configured using the class Link of the Robotics Toolbox. Five parameters have to be set as a vector. The first four are ,
,
and
and the last one defines the type of the joint. For a revolute joint, the type parameter has to be set to
, for a prismatic joint to
.
- L = Link([theta d a alpha type])
So if a manipulator consisting of one prismatic joint and two revolute joints is to be created, the three links could be configured as follows:
The corresponding serial link is then created using the class SerialLink and passing the existing links in form of a vector as parameter: