MATLAB: Denavit Hartenberg parameters
From Robotics
← Previous: Quaternions | Web interface | MATLAB overview | Back to article: Denavit-Hartenberg parameters | Next: A-Matrices → |
Individual Links can be configured using the class Link of the Robotics Toolbox. Five parameters have to be set as a vector. The first four are , , and and the last one defines the type of the joint. For a revolute joint, the type parameter has to be set to , for a prismatic joint to .
- L = Link([theta d a alpha type])
So if a manipulator consisting of one prismatic joint and two revolute joints is to be created, the three links could be configured as follows:
The corresponding serial link is then created using the class SerialLink and passing the existing links in form of a vector as parameter: