Assigning coordinate frames

← Back: Denavit-Hartenberg Convention

Overview: Denavit-Hartenberg Convention

Next: Denavit-Hartenberg parameters →

To be able to determine the spatial relationship or transformation, respectively, between the links of a manipulator, local coordinate frames have to assigned to them first. There are several rules that have to be observed when assigning coordinate frames following the Denavit-Hartenberg convention.

Notation

The notation of the links and joints is shown in the figure below. A manipulator consists of $n$ links that are connected with $n$ joints. The links correspond to the rigid parts of an arm and the joints are the flexible connections between them. A joint is always assigned to the proximate link. So a link $L_i$ is connected with its joint $J_i$ to the end of link $L_{i-1}$. The proximate link $L_{i+1}$ is then mounted to the end of $L_i$ via its joint $J_{i+1}$. The first link $L_1$ is mounted on the base via joint $J_1$ and the end of the last link $L_n$ corresponds to the end-effector.