Difference between revisions of "Assigning coordinate frames"
Line 13: | Line 13: | ||
===Main joint axes=== | ===Main joint axes=== | ||
+ | Following the above notation, a coordinate frame is attached to each end of a link at the corresponding joint. The orientation of the coordinate frames depends on the joint and on the prior frame. There is one rule, that is always valid. This is, that the <math>z</math>-axis of a coordinate frame is always pointing in the direction of the main axis of the related joint. Like can be seen in the figure on the left, the main axis of a prismatic joint is the axis along which the displacement in positive direction is applied. For a revolute joint, the main axis is the rotation axis. | ||
− | + | [[File:privres-zaxes.png|left|150px]] | |
− | + | [[File:right-hand-rotation.png|right|100px]] | |
− | [[File:privres-zaxes.png|right| | ||
[[Category:Article]] | [[Category:Article]] | ||
[[Category:Denavit-Hartenberg]] | [[Category:Denavit-Hartenberg]] |
Revision as of 17:20, 30 October 2015
← Back: Denavit-Hartenberg Convention | Overview: Denavit-Hartenberg Convention | Next: Denavit-Hartenberg parameters → |
To be able to determine the spatial relationship or transformation, respectively, between the links of a manipulator, local coordinate frames have to assigned to them first. There are several rules that have to be observed when assigning coordinate frames following the Denavit-Hartenberg convention.
Notation
The notation of the links and joints is shown in the figure below. A manipulator consists of links that are connected with
joints. The links correspond to the rigid parts of an arm and the joints are the flexible connections between them. A joint is always assigned to the proximate link. So a link
is connected with its joint
to the end of link
. The proximate link
is then mounted to the end of
via its joint
. The first link
is mounted on the base via joint
. So the base is actually link
but does not directly belong to the manipulator. The end of the last link
corresponds to the end-effector.
The coordinate frames are always attached to the end of the links at the distal joints. The first coordinate frame, indexed , is the base or reference frame and attached to the base in joint
. The next frame is
at the end of link
in joint
followed by
at the end of
and so on. The coordinate frame
of the last link is finally attached to the end of of the manipulator and so to the end-effector.
Main joint axes
Following the above notation, a coordinate frame is attached to each end of a link at the corresponding joint. The orientation of the coordinate frames depends on the joint and on the prior frame. There is one rule, that is always valid. This is, that the -axis of a coordinate frame is always pointing in the direction of the main axis of the related joint. Like can be seen in the figure on the left, the main axis of a prismatic joint is the axis along which the displacement in positive direction is applied. For a revolute joint, the main axis is the rotation axis.